Diving deep into RouterOS: Switching

This video will dive deep into hardware offloading features in MikroTik devices.
Slides: https://box.mikrotik.com/f/d7fbb163d26945a99a0a/?dl=1

00:00 - Intro
00:28 - Presentation about bridge hardware offloading
21:54 - If there is traffic congestion on interface, how priorities are assigned?
22:12 - How can I set priority of the CPU switch?
22:40 - How can I set priority on the switch CPU?
23:01 - Bridge port PVID vs Bridge VLAN untagged port. Why are there two places to set "untagged"?
23:32 - Is there a way to show bridge root changes in the log?
24:13 - Will RouterOS v7 bridge VLAN filtering be combined with hardware Layer 3
to build type of Layer 3 switch?
24:47 - Will VXLAN be considered for HW offloading in CRS3xx series?
25:06 - Mixing CCR with CRS for PPP connection
25:43 - Which interface ARP mode will override port isolation settings?
26:24 - Is MikroTik planning for stacking of switches?
26:44 - Is hardware offloading for MPLS supported?
27:10 - Does frame type setting on the bridge port overrides the frame types
on bridge interfaces?
27:41 - Does traffic going between multiple switch chips must go through CPU?
27:56 - Is VPLS supported in HW for CRS3xx series?
28:32 - Which RouterOS bonding transmit hash policy will load balance Layer 3 routed
traffic most equaly?
28:53 - Why VLAN mode names are not the same when You set on a bridge VLAN,
SwitchOS and others?
29:43 - Which is better way to bond two VLANs using hardware offloading?
30:09 - Weather in Riga?
30:17 - Do You have a plan for implementing Cisco VTP?
30:39 - Why some switch port settings work without hardware offloaded bridge?
31:17 - Could You explain a little bit more about the port extender and controller bridge?
32:02 - Which is the best way to limit traffic for VLAN interface?
32:11 - Is there any restrictions for hardware offloading when using 802.1x?
32:34 - GVRP. What is that?
32:49 - Can I configure switch using python script? *API is available only on RouterOS
33:16 - If trunk port connected with other vendor's switch and that switch
does not allow VLAN 1, then this trunk port does not work.
33:35 - Frame types, ingress filtering in bridge - is it only for the CPU port and has
to be enabled on each bridge port?
34:40 - How to set PVID to dynamically added L2TP in bridge?
35:29 - Does frame type setting works only when ingress filtering is enabled?
35:54 - It looks like MAC-based VLAN would leak broadcasts on egress from multiple VLANs
to those ports where MAC-based VLAN is used. Is this the case?
36:47 - What about microbursts when upstream port speed is 10G and downstream is 100M?
37:29 - What are the differences between egress filtering and ingress filtering?
38:36 - CAKE and FQ-Codel can help with microbursts. Will they be supported in HW on CRS3xx?
39:03 - If I turn on horizon, is hw-offload turned off?
39:11 - Any plans for MAC address learn limit or lock?
39:29 - On CRS devices is ir better to do VLANs on switch menu or bridge?
39:58 - For more questions and information visit:
https://mikrotik.com/consultants
https://mikrotik.com/training
https://mikrotik.com/buy
https://forum.mikrotik.com
Thanks for watching!